www.elektron-bulgin.com 176 switches switches switches MPL027 mpl038 sealed to ip66 mpl025 specification MPL027 mpl038 mpl025 terminations: solder tags solder tags solder tags switching: s.p.m.b. - latching s.p.m.b. - latching s.p.m.b. - latching max. rating: 2a, 50vac/dc 2a, 50vac/dc 2a, 50vac/dc contact resistance: <10m ? <10m ? <10m ? insulation resistance: >10 3 m ? >10 3 m ? . >10 3 m ? dielectric strength: >2.0kvac >2.0kvac >2.0kvac operating temp. range: C20?c to + 70?c C20?c to + 70?c C20?c to + 70?c sealing (front of panel only) : - protection classification: ip66 en60529 - 1992 (switch not sealed) operations mechanical: 8,000 (min) 8,000 (min) 8,000 (min) electrical: 8,000 (min) 8,000 (min) 8,000 (min) operating pressure: 5.5n (typ) 5.5n (typ) 5.5n (typ) rear nut fixing torque: 2.5nm 1.13nm C materials mouldings: glass filled nylon glass filled nylon glass filled nylon tags/terminations: brass, tin plated brass, tin plated brass, tin plated switch body & button: stainless steel stainless steel stainless steel contacts: fine silver fine silver fine silver thread size: 1.0 x 26tpi 1.0" x 26tpi - compliant compliant compliant 28mm diameter 2a, 50vac/dc single pole push to make latching switch front panel sealed to ip66 28mm diameter 2a, 50vac/dc single pole push to make latching switch 22mm diameter 2a, 50vac/dc single pole push to make latching switch stainless steel low profile vandal resistant - latching front panel mounting front panel mounting rear panel mounting rohs switchessection - 2010:switchessection_v2 - 2005 8/6/10 17:15 page 176
|
